Are there any high powered 96v controllers out there

General Discussion about electric bicycles.
Post Reply
Mywpn   100 mW

100 mW
Posts: 49
Joined: Oct 19 2017 9:31am
Location: Australia

Are there any high powered 96v controllers out there

Post by Mywpn » Jan 17 2020 11:22pm

Hi all,
As the heading states. Are there any 96v controllers (max 120v) out there that will support more than 430 battery Amps and 600 battery amps?

john61ct   100 GW

100 GW
Posts: 5029
Joined: Dec 18 2018 2:06pm

Re: Are there any high powered 96v controllers out there

Post by john61ct » Jan 17 2020 11:47pm

For cars, forklifts, boats maybe big motorcycles.

Not really in "bicycle" territory anymore.

Would need to weigh what 30+lbs to be god at its job?

User avatar
DogDipstick   10 kW

10 kW
Posts: 594
Joined: Aug 19 2018 12:39pm
Location: Fleetwood Pa

Re: Are there any high powered 96v controllers out there

Post by DogDipstick » Jan 18 2020 3:28am

The Kellys....


.... No? I see > 96v and > 400A...

https://www.kellycontroller.com/controllers/brushless/
83.1v of Ironhorse XC.. :) :bolt: by Chevy :bolt: :D Broke 10 horsies :twisted: (..about 80% healed..).. :? Anybody.. what equals √3 times the line to neutral voltage? Asking for a friend.. :| (gottenymoem4115thangs?Yall?) :confused: Fabricator @ BSECo. Inc.

Mywpn   100 mW

100 mW
Posts: 49
Joined: Oct 19 2017 9:31am
Location: Australia

Re: Are there any high powered 96v controllers out there

Post by Mywpn » Jan 18 2020 6:14am

I have a kelly kls72v controller and was not impressed by its ability. I don’t mind if the controller weighs 10kg. Even up to 15kg. It’s hard to find anyone with real world figures on controllers as very few are prepared to push the limits of them. I may just have to stick with sabvoton. As much flack as people throw at them. I’m yet to find anything that comes close to an unlocked 96120. It has taken 400+ battery amps and 600 phase amps for over 12 months of every day use. And only failed from getting stuck when it started pouring rain half way home. I’ve depleted 2 battery packs and the controller was still going.

Frank   100 W

100 W
Posts: 174
Joined: Dec 10 2007 11:57am
Location: Maine/Nova Scotia

Re: Are there any high powered 96v controllers out there

Post by Frank » Jan 18 2020 6:20am

96120? Can you tell me more about this one ( who makes it)? Which motor do you use?

Sent from my SM-T380 using Tapatalk

Frank

john61ct   100 GW

100 GW
Posts: 5029
Joined: Dec 18 2018 2:06pm

Re: Are there any high powered 96v controllers out there

Post by john61ct » Jan 18 2020 9:31am


Mywpn wrote:unlocked 96120. It has taken 400+ battery amps and 600 phase amps for over 12 months of every day use.
Link please?

Is it FOC?


markz   100 GW

100 GW
Posts: 9401
Joined: Jan 09 2014 11:38pm
Location: Alberta Canada

Re: Are there any high powered 96v controllers out there

Post by markz » Jan 18 2020 6:41pm


Mywpn   100 mW

100 mW
Posts: 49
Joined: Oct 19 2017 9:31am
Location: Australia

Re: Are there any high powered 96v controllers out there

Post by Mywpn » Jan 19 2020 11:50pm

Sabvoton 96120 UNLOCKED the locked versions are discraceful. With one of my controllers through them they forgot to unlock and the maximum current in settings was imo slow and powerless. They sent me through an unlock program and once programmed, the difference is nothing but speechless compared.

Mywpn   100 mW

100 mW
Posts: 49
Joined: Oct 19 2017 9:31am
Location: Australia

Re: Are there any high powered 96v controllers out there

Post by Mywpn » Jan 19 2020 11:52pm

Frank wrote:
Jan 18 2020 6:20am
96120? Can you tell me more about this one ( who makes it)? Which motor do you use?

Sent from my SM-T380 using Tapatalk
Sabvoton 96120 unlocked. through QSmotors The motor is a QS273. There a big motor but it suits my needs

j bjork   10 kW

10 kW
Posts: 501
Joined: Aug 31 2018 3:01pm
Location: Linköping, Sweden

Re: Are there any high powered 96v controllers out there

Post by j bjork » Jan 20 2020 5:52am

APT 96800 and 961000 might be something if you can find them.
There is a note about them somwhere on this forum.

Edit: viewtopic.php?f=7&t=103090&p=1507922&hi ... 0#p1507922

john61ct   100 GW

100 GW
Posts: 5029
Joined: Dec 18 2018 2:06pm

Re: Are there any high powered 96v controllers out there

Post by john61ct » Jan 20 2020 6:00am


Mywpn wrote:Sabvoton 96120 unlocked. through QSmotors

The motor is a QS273.
Is that controller capable of getting (close to) that motor's full potential?


larsb   1 MW

1 MW
Posts: 1734
Joined: Dec 10 2014 5:12am
Location: Gothenburg, Sweden

Re: Are there any high powered 96v controllers out there

Post by larsb » Jan 20 2020 6:50am

Votol em-300 would be an option. See www.votol.net
Ride on!

Mywpn   100 mW

100 mW
Posts: 49
Joined: Oct 19 2017 9:31am
Location: Australia

Re: Are there any high powered 96v controllers out there

Post by Mywpn » Jan 21 2020 11:08am

j bjork wrote:
Jan 20 2020 5:52am
APT 96800 and 961000 might be something if you can find them.
There is a note about them somwhere on this forum.

Edit: viewtopic.php?f=7&t=103090&p=1507922&hi ... 0#p1507922
Thank you. I will look into that controller.

Mywpn   100 mW

100 mW
Posts: 49
Joined: Oct 19 2017 9:31am
Location: Australia

Re: Are there any high powered 96v controllers out there

Post by Mywpn » Jan 21 2020 11:09am

larsb wrote:
Jan 20 2020 6:50am
Votol em-300 would be an option. See www.votol.net
I did see these. Do you know of anyone using this controller with good results?

Mywpn   100 mW

100 mW
Posts: 49
Joined: Oct 19 2017 9:31am
Location: Australia

Re: Are there any high powered 96v controllers out there

Post by Mywpn » Jan 21 2020 11:11am

john61ct wrote:
Jan 20 2020 6:00am
Mywpn wrote:Sabvoton 96120 unlocked. through QSmotors

The motor is a QS273.
Is that controller capable of getting (close to) that motor's full potential?
No, it barely gets warm. If I was overpowering it in future. It would only be for 10 sec at a time.

larsb   1 MW

1 MW
Posts: 1734
Joined: Dec 10 2014 5:12am
Location: Gothenburg, Sweden

Re: Are there any high powered 96v controllers out there

Post by larsb » Jan 21 2020 1:00pm

Mywpn wrote:
Jan 21 2020 11:09am
larsb wrote:
Jan 20 2020 6:50am
Votol em-300 would be an option. See www.votol.net
I did see these. Do you know of anyone using this controller with good results?
No, right now there are no users on ES that i know about. If you are the first, please start a thread :D
Ride on!

Mywpn   100 mW

100 mW
Posts: 49
Joined: Oct 19 2017 9:31am
Location: Australia

Re: Are there any high powered 96v controllers out there

Post by Mywpn » Jan 21 2020 6:22pm

larsb wrote:
Jan 21 2020 1:00pm
Mywpn wrote:
Jan 21 2020 11:09am
larsb wrote:
Jan 20 2020 6:50am
Votol em-300 would be an option. See www.votol.net
I did see these. Do you know of anyone using this controller with good results?
No, right now there are no users on ES that i know about. If you are the first, please start a thread :D
I messaged qs motors about purchasing a new controller and they sell that controller. But I noticed they have put ok there site “coming out next month 96v 150 controller, Details soon”. But of course I emailed about it and there response was we can unlock 96120 to 150a. 😳. I’ve had 3 96120 unlocked. And specified that.

john61ct   100 GW

100 GW
Posts: 5029
Joined: Dec 18 2018 2:06pm

Re: Are there any high powered 96v controllers out there

Post by john61ct » Jan 21 2020 7:38pm

and, what?

The 150 hardware will probably be able to go higher

Chin0   1 µW

1 µW
Posts: 4
Joined: Oct 06 2019 6:07am

Re: Are there any high powered 96v controllers out there

Post by Chin0 » May 26 2020 5:30pm

Mywpn wrote:
Jan 19 2020 11:50pm
Sabvoton 96120 UNLOCKED the locked versions are discraceful. With one of my controllers through them they forgot to unlock and the maximum current in settings was imo slow and powerless. They sent me through an unlock program and once programmed, the difference is nothing but speechless compared.
Can i ask where do you buy unlocked 96120 version?? Im interested to try it. Thanks

Post Reply