I think throttle does not work due to an issue, but that is already solved on current master branch.gatorsean wrote: ↑Oct 31 2019 11:59amHi!
I recently completed a build with the SW102 on version 19. I am so close to a first ride i can taste it!
However, I cannot seem to get throttle or pedal assist working... The motor spins slowly in walk assist mode, so I know the motor and controller are ok. Also in the config, i see the throttle value changing when i press the throttle so that is working.
Strangely, if i am at the main screen and press the throttle nothing happens. Same with pedal assist. If i spin the crank, the motor does not respond.
I noticed my battery charged to 58V displays 59.6V on the display, so that reading is a bit high but doesn't appear to be causing a problem...
I don't have a speed sensor. Could that cause an issue? Any other ideas i might check?
Pedal assist should work, you must check that you have cadence, torque sensor and human power (human por you need to check on main screen).