Clamping torque arms 10mm flats SOLD CAN MAKE MORE

Place for dealers to post items for sale.
Post Reply
Tony01   10 W

10 W
Posts: 93
Joined: Nov 12 2015 2:24am
Location: San Jose, CA

Clamping torque arms 10mm flats SOLD CAN MAKE MORE

Post by Tony01 » Sep 22 2018 12:50am

ALL SOLD!! See reply post below!

CNC milled clamping torque arms for hub motors with 10mm axle flats (with qs205 step relief)

Price shipped to lower 48 USA. Can ship elsewhere for a price. Located in San Jose, CA.

Material: mild steel (weldable)
Slot: .402”. After painting will be very close to 10mm
Qs205 disc side step 4mm relief: yes, on all, ~.166”dp
Size: 1.37x.375x5.00” for very tight fit requiring some relief grinding into 1.5x.5x16ga box tubing
Pinch bolt hole: .250”
Deburring: minimal, edge breaks, tumbled

Require: some welding, some grinding, possibly hacksawing for more clamping, painting or powdercoating

I ordered one pair for myself for my custom build with qs205 and have three more pairs. Each TA has slot cut to .402” which after painting should come down to a few thousandths above 10mm/.394”. I do not plan on using a rear disc; only regen.
Attachments
B13FD157-105D-4A6B-8EEA-54E363FDE761.jpeg
B13FD157-105D-4A6B-8EEA-54E363FDE761.jpeg (128.81 KiB) Viewed 523 times
FC3E5EE0-B5F5-41F4-8297-2FF9D38F3896.jpeg
FC3E5EE0-B5F5-41F4-8297-2FF9D38F3896.jpeg (71.55 KiB) Viewed 523 times
08F601C6-658B-4BDF-84EC-83641452B77A.jpeg
08F601C6-658B-4BDF-84EC-83641452B77A.jpeg (123.51 KiB) Viewed 523 times
BB606F11-2AF8-41BB-84A3-FFFA35662A9A.jpeg
BB606F11-2AF8-41BB-84A3-FFFA35662A9A.jpeg (112.72 KiB) Viewed 523 times
3B7568C2-E35D-45CC-BB5C-1D0610FBEB69.jpeg
3B7568C2-E35D-45CC-BB5C-1D0610FBEB69.jpeg (137.18 KiB) Viewed 523 times
41D3687A-0994-48CC-9673-0B8A49BA8A19.jpeg
41D3687A-0994-48CC-9673-0B8A49BA8A19.jpeg (133.5 KiB) Viewed 523 times
Last edited by Tony01 on Sep 26 2018 3:12pm, edited 1 time in total.
I don't always listen to Alice in Chains.... but when I do, SO DO THE NEIGHBORS :D

Tony01   10 W

10 W
Posts: 93
Joined: Nov 12 2015 2:24am
Location: San Jose, CA

TAs

Post by Tony01 » Sep 24 2018 12:48am

ALL SOLD! regular price was $45+shipping

If you need more I can price it out. Seems these sold pretty fast so, if I can get 3 people that want them, I can have them delivered in about a month. Contact me or post here.

Will be finding a different machinist. The work this guy did would never fly in any shop I worked at. They may not look pretty in hand but would still work for the application.


Rejects shown below also sold.. But they'll work fine too. The ones I'll be using on my build look like this. But nobody will be looking at the location of the pinch bolt when the bike is built up. so IDC.
Attachments
CA80D005-AD95-4C3A-ACA3-B6E739ED5169.jpeg
CA80D005-AD95-4C3A-ACA3-B6E739ED5169.jpeg (58.64 KiB) Viewed 449 times
E278B1E2-46BD-4FF5-88D0-6BC0B1B3295C.jpeg
E278B1E2-46BD-4FF5-88D0-6BC0B1B3295C.jpeg (57.74 KiB) Viewed 449 times
I don't always listen to Alice in Chains.... but when I do, SO DO THE NEIGHBORS :D

Post Reply