Nucular electronics - complete kit for ev! [beta]

Place for dealers to post items for sale.

User avatar
PITMIX   100 W

100 W
Posts: 191
Joined: Nov 18 2018 3:25pm
Location: France

Re: Nucular electronics - complete kit for ev! [beta]

Post by PITMIX » Feb 10 2020 10:52am

Hi Vasili, I pre-ordered a 6F that I wanted to change to 12F, but do you think it's better to wait for the new 6F model ?
Aixam 550 Twin retrophite Qs 138 70H, Thermo-Nucular electronics 24F, LG Chem 20s 60Ah

User avatar
VasiliSk   1 kW

1 kW
Posts: 337
Joined: Apr 10 2014 5:11am
Location: Russia
Contact:

Re: Nucular electronics - complete kit for ev! [beta]

Post by VasiliSk » Feb 10 2020 11:01am

Well it's up to you :)
You can send me order number in PM and i will change to 12F

SRFirefox   100 mW

100 mW
Posts: 35
Joined: Apr 24 2019 7:27pm

Re: Nucular electronics - complete kit for ev! [beta]

Post by SRFirefox » Feb 10 2020 12:58pm

Thanks! Preorder placed!

User avatar
serious_sam   1 kW

1 kW
Posts: 321
Joined: Mar 05 2017 8:07am
Location: Australia

Re: Nucular electronics - complete kit for ev! [beta]

Post by serious_sam » Feb 10 2020 9:18pm

Hi Vasiliy,

Does it matter which phase wire the DC supply is connected to for charging ? Thanks.
Which Phase Wire.jpg
Which Phase Wire.jpg (64.92 KiB) Viewed 2624 times


User avatar
serious_sam   1 kW

1 kW
Posts: 321
Joined: Mar 05 2017 8:07am
Location: Australia

Re: Nucular electronics - complete kit for ev! [beta]

Post by serious_sam » Feb 11 2020 4:41am

Thank you.

bikerpete   10 W

10 W
Posts: 77
Joined: Jan 27 2020 9:09pm

Re: Nucular electronics - complete kit for ev! [beta]

Post by bikerpete » Feb 12 2020 11:46pm

HrKlev wrote:
Jan 27 2020 8:23am
Has anyone tried running a Cyclone 3000w with a Nucular 6f? Just made an order for one, hope it is a good match.
Did you ever get any definitive answer about this?
I'm planning the same - it looks like there should be some headroom on that controller, but I'm on my first build so want some hand holding :wink:

HrKlev   100 mW

100 mW
Posts: 46
Joined: Dec 06 2019 10:24am

Re: Nucular electronics - complete kit for ev! [beta]

Post by HrKlev » Feb 13 2020 10:51am

They recomended a 12F on a 3kw motor, so I put in a preorder for that. I do think I would have made a 6f work for the current build Im planning, but I know myself, so buying a 12f is probably a good idea anyway... 😬

lukashanak   1 W

1 W
Posts: 55
Joined: Apr 12 2019 12:27am

Re: Nucular electronics - complete kit for ev! [beta]

Post by lukashanak » Feb 17 2020 5:25am

bikerpete wrote:
Feb 12 2020 11:46pm
HrKlev wrote:
Jan 27 2020 8:23am
Has anyone tried running a Cyclone 3000w with a Nucular 6f? Just made an order for one, hope it is a good match.
Did you ever get any definitive answer about this?
I'm planning the same - it looks like there should be some headroom on that controller, but I'm on my first build so want some hand holding :wink:
I'm running 4kw cyclone with 12F. 10kw peaks. Cyclone with Nuc works well.
Cyclone 4kW mid drive + Nucular 12F + 18s lipo = 9kW of fun :twisted: :twisted:

bikerpete   10 W

10 W
Posts: 77
Joined: Jan 27 2020 9:09pm

Re: Nucular electronics - complete kit for ev! [beta]

Post by bikerpete » Feb 17 2020 5:47am

HrKlev wrote:
Feb 13 2020 10:51am
They recomended a 12F on a 3kw motor, so I put in a preorder for that. I do think I would have made a 6f work for the current build Im planning, but I know myself, so buying a 12f is probably a good idea anyway... 😬
I've now moved to an LMX 30mm motor. Adam at LMX bikes told me he thought it would be a bit under powered on the 6F. Nucular said they thought the 6F would be OK. I need to decide if I would prefer compact controller or possibly more power.
I'll probably buy the insurance of the 12F, but for my build I suspect the 6F might just be OK.

john61ct   100 GW

100 GW
Posts: 5121
Joined: Dec 18 2018 2:06pm

Re: Nucular electronics - complete kit for ev! [beta]

Post by john61ct » Feb 17 2020 6:32am

I bet you could order both, sell the one you don't use without losing much if anything

User avatar
PITMIX   100 W

100 W
Posts: 191
Joined: Nov 18 2018 3:25pm
Location: France

Re: Nucular electronics - complete kit for ev! [beta]

Post by PITMIX » Feb 17 2020 6:57am

If you take the 12F, you can set it for 4 or 5kW to preserve the engine or 10kW for performance. If you take the 6F maybe you will want to take the 12F later for more power.
Aixam 550 Twin retrophite Qs 138 70H, Thermo-Nucular electronics 24F, LG Chem 20s 60Ah

Ohbse   10 kW

10 kW
Posts: 880
Joined: Dec 26 2013 5:15pm
Location: Auckland, New Zealand

Re: Nucular electronics - complete kit for ev! [beta]

Post by Ohbse » Feb 17 2020 1:03pm

100% buy the 12f. For what you're doing you will want the phase amps, power limit doesn't matter so much.

electraflyit   10 W

10 W
Posts: 78
Joined: Jul 08 2008 12:19am
Location: Toowoomba, Queensland

Re: Nucular electronics - complete kit for ev! [beta]

Post by electraflyit » Feb 18 2020 7:14pm

Hi,
Is there a link to what order number you are currently up to.
Gives us an idea of how far away our order is.
Thanks for a great controller and your online support. Can't wait to get mine.
Eddie

User avatar
PITMIX   100 W

100 W
Posts: 191
Joined: Nov 18 2018 3:25pm
Location: France

Re: Nucular electronics - complete kit for ev! [beta]

Post by PITMIX » Feb 19 2020 11:35am

Hi guys ! Can you give me an idea of ​​tuning to get the most economical operation possible for my 450kg vehicle. :roll:
A minimum of 85A battery is required to drive at 50km / h on a flat road.
Aixam 550 Twin retrophite Qs 138 70H, Thermo-Nucular electronics 24F, LG Chem 20s 60Ah

User avatar
VasiliSk   1 kW

1 kW
Posts: 337
Joined: Apr 10 2014 5:11am
Location: Russia
Contact:

Re: Nucular electronics - complete kit for ev! [beta]

Post by VasiliSk » Feb 19 2020 1:00pm

I suggest you to limit speed around 60kmh with %, not with power
Setup some medium phase amps like 250-350 and whatever battery

User avatar
PITMIX   100 W

100 W
Posts: 191
Joined: Nov 18 2018 3:25pm
Location: France

Re: Nucular electronics - complete kit for ev! [beta]

Post by PITMIX » Feb 19 2020 2:32pm

Thanks Vasili ! I will try :thumb:
Aixam 550 Twin retrophite Qs 138 70H, Thermo-Nucular electronics 24F, LG Chem 20s 60Ah

User avatar
Merlin   10 MW

10 MW
Posts: 2015
Joined: Jan 29 2013 10:00am
Location: europe

Re: Nucular electronics - complete kit for ev! [beta]

Post by Merlin » Feb 19 2020 3:32pm

cosmetic bug report :D

Wattage overlays amps in Display.

it would be cool to have the option to change in Display watt to kw.
so low power users can use watts and high power geeks can use kw in display.



User avatar
VasiliSk   1 kW

1 kW
Posts: 337
Joined: Apr 10 2014 5:11am
Location: Russia
Contact:

Re: Nucular electronics - complete kit for ev! [beta]

Post by VasiliSk » Feb 19 2020 3:50pm

yeah i noticed. will do

PITMIX try different stuff, it may be different

User avatar
PITMIX   100 W

100 W
Posts: 191
Joined: Nov 18 2018 3:25pm
Location: France

Re: Nucular electronics - complete kit for ev! [beta]

Post by PITMIX » Feb 22 2020 1:50am

Hi friends :D
Last night I did a little test with the settings in economy mode:
The consumption went from 101wh / km to 70wh / km on the same short route: cool:

Current setting in V1 = 85A battery - 250A phases - 100% speed - FW disabled => 70wh / km
Appropriate acceleration and maximum speed of more than 45km / h real.

Previou setting in V1 = 85A battery - 450A phases - 150% speed - FW= 30A => 101wh / km.
Good acceleration and maximum speed of 54km / h.

Another previous setting in V1 = 100A battery - 160A phases - 150% speed - FW = 80A => 95wh / km.
Soft acceleration and maximum speed of 54km / h.

Thanks Vasili :bigthumb:
Aixam 550 Twin retrophite Qs 138 70H, Thermo-Nucular electronics 24F, LG Chem 20s 60Ah

User avatar
PITMIX   100 W

100 W
Posts: 191
Joined: Nov 18 2018 3:25pm
Location: France

Re: Nucular electronics - complete kit for ev! [beta]

Post by PITMIX » Feb 23 2020 8:02am

Hi !
I connected my little Gophret 6003 directly to charge the battery.
Now that my motor has a sensor on the winding I can use the controller to charge the battery.
On the controller, I set the battery voltage to 83v max, the charging current to 2.5A max. I set the engine temperature to 50 ° c max.
The Gophret is set to 60v and 2.5A.
Attachments
IMG_20200223_110907.jpg
IMG_20200223_110907.jpg (414.5 KiB) Viewed 1759 times
Aixam 550 Twin retrophite Qs 138 70H, Thermo-Nucular electronics 24F, LG Chem 20s 60Ah

User avatar
Willow   10 kW

10 kW
Posts: 812
Joined: Sep 06 2011 7:42pm
Location: Tasmania

Re: Nucular electronics - complete kit for ev! [beta]

Post by Willow » Feb 24 2020 3:26am

PLS HELP

what is the name / model / type of plugs used in the back of the screen... I need to replace one and my searching is not fruitful.

Cheers.

Simon.

User avatar
VasiliSk   1 kW

1 kW
Posts: 337
Joined: Apr 10 2014 5:11am
Location: Russia
Contact:

Re: Nucular electronics - complete kit for ev! [beta]

Post by VasiliSk » Feb 24 2020 4:22am

https://www.aliexpress.com/item/3283649 ... b201603_53

PHD 2.0mm
PNs:
http://www.jst-mfg.com/product/detail_e.php?series=201

to PITMIX:
If you are using engine speed below maximum, or there is strict battery/phase current limitation - FW will not work

User avatar
Willow   10 kW

10 kW
Posts: 812
Joined: Sep 06 2011 7:42pm
Location: Tasmania

Re: Nucular electronics - complete kit for ev! [beta]

Post by Willow » Feb 24 2020 5:17am

Thanks V.

Post Reply