Nucular electronics - complete kit for ev! [beta]

Place for dealers to post items for sale.
L3chef   10 W

10 W
Posts: 73
Joined: Jul 27 2018 12:27pm
Location: Finland

Re: Nucular electronics - complete kit for ev! [beta]

Post by L3chef » Mar 02 2019 6:31am

How's the production going? Is March-April still accurate for the 12fet and bms?
Asking just so I can plan my build a bit better

User avatar
VasiliSk   1 kW

1 kW
Posts: 335
Joined: Apr 10 2014 5:11am
Location: Russia
Contact:

Re: Nucular electronics - complete kit for ev! [beta]

Post by VasiliSk » Mar 03 2019 4:58am

accurate for 12F and 6F
tiny bms just started testing, it will be later

L3chef   10 W

10 W
Posts: 73
Joined: Jul 27 2018 12:27pm
Location: Finland

Re: Nucular electronics - complete kit for ev! [beta]

Post by L3chef » Mar 05 2019 4:22am

VasiliSk wrote:
Mar 03 2019 4:58am
accurate for 12F and 6F
tiny bms just started testing, it will be later
Thanks for the info!

Peterfr12   100 mW

100 mW
Posts: 49
Joined: Jun 16 2010 9:24am
Location: Hertfordshire, United Kingdom

Re: Nucular electronics - complete kit for ev! [beta]

Post by Peterfr12 » Mar 08 2019 8:04am

Hi Vasili,

I am building my 3rd ebike with a 3 kW Mxus hub motor which will be fed with a 20s14p battery. I am looking now for a 72V controller, a 20s BMS, a 20s charger. The 12F nucular seems a good candidate and the price is very competitive. If I understand, the controller is sold with an LCD monitor (so I can get rid off of the Cycle Analyst).

Forget my ignorance, but:
1) will your controller come with a 20s BMS and when will it be ready?
2) can I charge directly my battery through this controller without using a 20s charger via a coil as for the Adaptto? When this option will be available?

Basically, if the nucular controller can fulfil the role of a controller (250£), a cycle analyst (120£), a 20s BMS (100£) and a 20s charger (100£) I will save money.

Thanks
Pierre

bhartshorn   100 µW

100 µW
Posts: 9
Joined: Mar 04 2019 1:14pm
Location: Idaho, USA

Re: Nucular electronics - complete kit for ev! [beta]

Post by bhartshorn » Mar 13 2019 12:31pm

Sent a PM to be put on queue for 12F. Controller looks awesome!

EDIT: I asked in the Telegram channel if this controller would work for my application, and it was recommended that it's not ready for RC motors yet. Just putting the exchange in here for anyone searching the thread for info. I was planning on using for a scooter build with an Alien Power Systems (APS) C80100 80kV motor.
Brandon Hartshorn
Asked to be put on the queue for 12fet. Would I be OK with an alien power systems c80100 80kV? Planning on 12s at first, maybe 18s in future
Vasiliy
Im not recomending to use it with RC motors atm
These need some testing and tweaks in code, i dont have time right now to do that
Excellent work anyway. Hopefully it will support these motors in the future.
Last edited by bhartshorn on Mar 14 2019 9:23am, edited 1 time in total.

User avatar
minde28383   10 kW

10 kW
Posts: 549
Joined: Apr 02 2010 7:11am

Re: Nucular electronics - complete kit for ev! [beta]

Post by minde28383 » Mar 13 2019 4:26pm

Who is already running this controller with hub(s)?
Can you compare it's performance with know controllers like sabvoton 72150 72100 7280, max, and kelly 7230, Kelly mini, or other controllers.
ebike build in progress
CN 5.5kw scooter (on sale)
E Mindless Maverick Talisman longboard, 2.2KW motor, 150Amps controller (on sale)

j bjork   1 kW

1 kW
Posts: 497
Joined: Aug 31 2018 3:01pm
Location: Linköping, Sweden

Re: Nucular electronics - complete kit for ev! [beta]

Post by j bjork » Mar 14 2019 1:43am

ninde28383, it is at least one with dual hubs who is testing dual 12 fets if I remember correct. What is he called, crc?
I don´t know if he made any comparison with sabvoton or kelly, but he was very impressed with nucular when he compared to adaptto.
I think you can find it in this tread.

Peterfr12

From what I have read, the controller comes with the display, but not the bms. The bms is not finished yet, and I don´t think there are any dates mentioned yet. I think this info is on the first page of this thread.

2, yes, it should be avalible from the start. I am not sure if you always need a coil.

User avatar
VasiliSk   1 kW

1 kW
Posts: 335
Joined: Apr 10 2014 5:11am
Location: Russia
Contact:

Re: Nucular electronics - complete kit for ev! [beta]

Post by VasiliSk » Mar 14 2019 3:23am

Peterfr12, yes there will be 24S BMS, but probably later than 16S.
You can already charge, but you dont need any extra coils. Im using motor as coil.

csc   100 W

100 W
Posts: 161
Joined: Dec 13 2016 7:40am

Re: Nucular electronics - complete kit for ev! [beta]

Post by csc » Mar 14 2019 8:22am

minde28383 wrote:
Mar 13 2019 4:26pm
Who is already running this controller with hub(s)?
Can you compare it's performance with know controllers like sabvoton 72150 72100 7280, max, and kelly 7230, Kelly mini, or other controllers.
I do. Six months now. It's a really good controller. Much more simple than Adaptto (my only reference) and WAY MORE RELIABLE

User avatar
cheeko   100 W

100 W
Posts: 168
Joined: Mar 25 2014 10:59pm
Location: Brisbane AU

Re: Nucular electronics - complete kit for ev! [beta]

Post by cheeko » Mar 19 2019 10:52pm

What sort of RPM will the 16fet Be like >10000RPM just thinking Mid Drive in Future
20S7P Futr Beta 26" Mxus3k with the Unbelievable Nucular 12F

redline2097   100 W

100 W
Posts: 165
Joined: Jun 18 2015 1:43am

Re: Nucular electronics - complete kit for ev! [beta]

Post by redline2097 » Mar 20 2019 2:17am

cheeko wrote:
Mar 19 2019 10:52pm
What sort of RPM will the 16fet Be like >10000RPM just thinking Mid Drive in Future
What model are you refering to? There are only 6f, 12f and 24f models....

User avatar
cheeko   100 W

100 W
Posts: 168
Joined: Mar 25 2014 10:59pm
Location: Brisbane AU

Re: Nucular electronics - complete kit for ev! [beta]

Post by cheeko » Mar 20 2019 7:09pm

The 12F

Im thinking of looking at the X1pro Mid drive and they asked if control capable of this, its in spec with amps and wattage.

I guess its more like RC motor that spin much higher RPM then Hub motor
20S7P Futr Beta 26" Mxus3k with the Unbelievable Nucular 12F

User avatar
Jonboy   100 W

100 W
Posts: 296
Joined: Aug 18 2013 9:48am
Location: S. Wales

Re: Nucular electronics - complete kit for ev! [beta]

Post by Jonboy » Mar 24 2019 1:16pm

brumbrum wrote:
Oct 10 2018 3:04pm
csc wrote:
Oct 10 2018 2:54pm
It's a 2wd setup ! Max battery amps around 175A /17 kw

https://www.youtube.com/watch?v=rvdG_aE ... e=youtu.be
That goes well... :D

csc   100 W

100 W
Posts: 161
Joined: Dec 13 2016 7:40am

Re: Nucular electronics - complete kit for ev! [beta]

Post by csc » Mar 26 2019 2:39am

Indeed. happier and happier with this setup

j bjork   1 kW

1 kW
Posts: 497
Joined: Aug 31 2018 3:01pm
Location: Linköping, Sweden

Re: Nucular electronics - complete kit for ev! [beta]

Post by j bjork » Mar 26 2019 3:02am

Soo.. Are people starting to get their 12fet controllers?

User avatar
bigbore   10 kW

10 kW
Posts: 531
Joined: Sep 25 2009 7:43am
Location: Italy

Re: Nucular electronics - complete kit for ev! [beta]

Post by bigbore » Mar 26 2019 8:50am

csc wrote:
Mar 26 2019 2:39am
Indeed. happier and happier with this setup
What about the BMS? Are you using one?

User avatar
madin88   1 GW

1 GW
Posts: 3069
Joined: May 27 2013 2:02am
Location: Austria

Re: Nucular electronics - complete kit for ev! [beta]

Post by madin88 » Mar 26 2019 1:47pm

VasiliSk wrote:
Jan 23 2019 6:45am
BMS under development
6F goes to March due to production delay and chinese NY, we are preparing some awesome news
Any news yet about the size of the BMS and it's connectors?
Will it support single cell voltage monitoring in smaller configurable groups of four or something like that (i mean similar as Adaptto where you can set the number of cells per group from 2-4 and each group is insulated)?

Because in case if someone wants to connect lets say two 10s batteries in series to 20s with a longer wire in between, it would not work well beacuse of the voltage drop or rise between cell 10 and 11 if the connector would be full-length (one uniform part).

Will the BMS support such particular battery configurations?

User avatar
cheeko   100 W

100 W
Posts: 168
Joined: Mar 25 2014 10:59pm
Location: Brisbane AU

Re: Nucular electronics - complete kit for ev! [beta]

Post by cheeko » Mar 26 2019 8:34pm

redline2097 wrote:
Mar 20 2019 2:17am
cheeko wrote:
Mar 19 2019 10:52pm
What sort of RPM will the 16fet Be like >10000RPM just thinking Mid Drive in Future
What model are you refering to? There are only 6f, 12f and 24f models....
there.

Yes the 12F one
Last edited by cheeko on Mar 27 2019 1:19am, edited 1 time in total.
20S7P Futr Beta 26" Mxus3k with the Unbelievable Nucular 12F

Dung   10 mW

10 mW
Posts: 22
Joined: Feb 25 2019 5:17pm

Re: Nucular electronics - complete kit for ev! [beta]

Post by Dung » Mar 28 2019 9:41am

Hi VasiliSk

Can u sign me up for 1 x Nucular controller 12F and how long is the queue? When can I expect to receive it?

How about the BMS (the 16s and 24) will it be ready in around 1-2 months, if yes put me on queue too.

Thx

Aeron   10 W

10 W
Posts: 84
Joined: Jun 12 2018 8:04am
Location: Europe

Re: Nucular electronics - complete kit for ev! [beta]

Post by Aeron » Apr 03 2019 1:37pm

Any news on the ETA ?

Stevebequik   1 mW

1 mW
Posts: 16
Joined: Mar 18 2019 7:35pm

Re: Nucular electronics - complete kit for ev! [beta]

Post by Stevebequik » Apr 04 2019 10:37pm

I have signed up for a 24f when available.
Quick question on max voltage.
Currently running a 22s Chevy volt pack. 92 volts fully charged.
Will this work? Is it likely to cutout on high voltage depending on regen settings?

Thanks

Turbomatic   1 mW

1 mW
Posts: 14
Joined: Nov 14 2014 3:33am

Re: Nucular electronics - complete kit for ev! [beta]

Post by Turbomatic » Apr 09 2019 7:09am

Hello guys! My name is Dima. I'm from Nucular team and I will help Vasiliy with preorders.
If you have any questions about preorders, ETA and etc, just ask me. Also, we install CRM and now we can tell your preorder number, for your convenience :)
Dung wrote:
Mar 28 2019 9:41am
Can u sign me up for 1 x Nucular controller 12F and how long is the queue? When can I expect to receive it?
How about the BMS (the 16s and 24) will it be ready in around 1-2 months, if yes put me on queue too.
We put your preorder in the queue. Your preorder № 283C. BMS will be ready for shipping in end of the year, maybe earlier.
We working on it.
j bjork wrote:
Mar 26 2019 3:02am
Soo.. Are people starting to get their 12fet controllers?
People will start to get 12F in April. Your preorder 269C (24F controller)
madin88 wrote:
Mar 26 2019 1:47pm
Any news yet about the size of the BMS and it's connectors?
Will it support single cell voltage monitoring in smaller configurable groups of four or something like that (i mean similar as Adaptto where you can set the number of cells per group from 2-4 and each group is insulated)?

Because in case if someone wants to connect lets say two 10s batteries in series to 20s with a longer wire in between, it would not work well beacuse of the voltage drop or rise between cell 10 and 11 if the connector would be full-length (one uniform part).

Will the BMS support such particular battery configurations?
You will be able to add extra balancing wires and disable unused cells. But there are no groups, you need to put balancing wire on both ends of long power wire and connect it like there is a cell.
Aeron wrote:
Apr 03 2019 1:37pm
Any news on the ETA ?
Your preorder 84C (6F). ETA as we hope, in April
Stevebequik wrote:
Apr 04 2019 10:37pm
I have signed up for a 24f when available.
Quick question on max voltage.
Currently running a 22s Chevy volt pack. 92 volts fully charged.
Will this work? Is it likely to cutout on high voltage depending on regen settings?
Absolute maximum 95V, this will work. Your preorder 284C (24F)

L3chef   10 W

10 W
Posts: 73
Joined: Jul 27 2018 12:27pm
Location: Finland

Re: Nucular electronics - complete kit for ev! [beta]

Post by L3chef » Apr 09 2019 7:21am

Turbomatic wrote:
Apr 09 2019 7:09am
Hello guys! My name is Dima.
Hi Dima! Could you tell me what my que # is and when I can expect it
Thanks!

Aeron   10 W

10 W
Posts: 84
Joined: Jun 12 2018 8:04am
Location: Europe

Re: Nucular electronics - complete kit for ev! [beta]

Post by Aeron » Apr 09 2019 7:49am

Thanks for these informations Dima !

Great to see things are taking off (I'm not only talking about the preorder, but it seems the business side is getting started and organised)!

Zeurus   10 mW

10 mW
Posts: 22
Joined: Sep 09 2018 10:02am

Re: Nucular electronics - complete kit for ev! [beta]

Post by Zeurus » Apr 09 2019 2:04pm

Hi VasiliSk and Dima

Great work on the ESC you put together!
ive got a question: we did run a vesc 4.12(60Volt) till now and had problems with voltage spikes(burnt DRV Chip), as we have the battery pack(12s12p) in our backpack. The battery wires are about 1m each phase and bond togehter.
do we have to add Caps before your Nucular 12F Controller as it is disigned for 95V?

Could you guess the date(month) we would get it in Austria?

If theres no Problem about it, we would like to get on the que for 2x 12F Controllers.
thx in Advance, Alex
27.5''plus Hardtail :wink:
viewtopic.php?f=6&t=103637

26'' Fully with 6374 and VESC
viewtopic.php?f=6&t=99610

Post Reply