Page 1 of 1

FOCBOX Controller (Legacy) - 3 kW

Posted: Dec 10 2019 1:26pm
by Scal_Design
Speed Controller FOCBOX based upon the VESC.

For 3 kW motor, sensor and sensorless mode.
BLDC and Field-Oriented Control mode.
Max input voltage: 50.4 V
Load current: 60A (Continuous), 120A (Burst)

Regenerative brake mode
Supports many different motors via a motor detection function
Firmware fully upgradable and customizable (VESC Open Source project).

Can be used on Electric Skateboard or light bicycle.
Two controllers can be connected via the CAN BUS to create a 2WD vehicle or use a ppm link (like RC Receiver).

260€
VAT Included, without shipping cost from France

4 items available
IMG_5134.jpeg
IMG_5134.jpeg (127.94 KiB) Viewed 905 times
IMG_5135.jpeg
IMG_5135.jpeg (156.35 KiB) Viewed 905 times
Electrical guide.PNG
Electrical guide.PNG (119.25 KiB) Viewed 833 times