FOCBOX Controller (Legacy) - 3 kW

Place for dealers to post items for sale.
Post Reply
Scal_Design   100 µW

100 µW
Posts: 9
Joined: Jun 01 2017 7:14am

FOCBOX Controller (Legacy) - 3 kW

Post by Scal_Design » Dec 10 2019 1:26pm

Speed Controller FOCBOX based upon the VESC.

For 3 kW motor, sensor and sensorless mode.
BLDC and Field-Oriented Control mode.
Max input voltage: 50.4 V
Load current: 60A (Continuous), 120A (Burst)

Regenerative brake mode
Supports many different motors via a motor detection function
Firmware fully upgradable and customizable (VESC Open Source project).

Can be used on Electric Skateboard or light bicycle.
Two controllers can be connected via the CAN BUS to create a 2WD vehicle or use a ppm link (like RC Receiver).

260€
VAT Included, without shipping cost from France

4 items available
IMG_5134.jpeg
IMG_5134.jpeg (127.94 KiB) Viewed 852 times
IMG_5135.jpeg
IMG_5135.jpeg (156.35 KiB) Viewed 852 times
Electrical guide.PNG
Electrical guide.PNG (119.25 KiB) Viewed 780 times

Post Reply