Sevcon HVLP10/20 Progamming

Electric Motors and Controllers
Post Reply
eddiebigmouth   1 µW

1 µW
Posts: 1
Joined: Mar 03 2020 3:10pm

Sevcon HVLP10/20 Progamming

Post by eddiebigmouth » Mar 03 2020 3:34pm

Hello all,
I am working with two Sevcon HVLP controllers - HVLP10 (air cooled) and HVLP 20 (water cooled).
I already have the required software/hardware to program these inverters but there are some issues.
In the DVT software, Helper section, the local I/Os cannot be configured for both controllers while the TPDOs and RPDOs tab does not work with the HVLP20. Also, I need to figure out how can I control the main and precharge contactors with the same.(attached screenshots)
Any help is appreciated.

This is a list of all hardware/software that I have:
1. Ixxat can compact usb to CAN adapter
2. Sevcon DVT software
Attachments
IO.jpg
IO.jpg (52.55 KiB) Viewed 1591 times
TPDO_RPDO.jpg
TPDO_RPDO.jpg (10.98 KiB) Viewed 1591 times

Post Reply