Search found 10 matches

by Localhorst666
Jan 29 2020 7:56am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4978
Views: 349184

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

A minor issue: this (see attachment) happens sometimes when I change graph by using "-" / down. I read somewhere that another guy experienced the same.
IMG_20200128_204640.jpg
IMG_20200128_204640.jpg (32.61 KiB) Viewed 1147 times
by Localhorst666
Jan 27 2020 2:15pm
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4978
Views: 349184

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

@casainho I just checked assistance regarding lights. My problem is caused by the lights! If they are switched on, the assist goes off. As soon as I turn them off, the motor turns on and it works very well! Battery current = 0,2 amps (measured by display) If you need a more exact value ,I have to u...
by Localhorst666
Jan 27 2020 1:47pm
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4978
Views: 349184

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

Maybe have like a frequent (but efficient) interval to save persistent values like the odometer or other future persistent values. For those who use other methods of turning the bike off For the values to be saved, the user need to turn off the system as usually by long press on the ON/OFF button. ...
by Localhorst666
Jan 27 2020 11:54am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4978
Views: 349184

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

@casainho Is it possible for future enhancement to save the odometer field? If i turn off using the battery switch, i think the information gets lost. Hi, it is saved I think. I disconnected battery for 2 days at the weekend and the value is still the same like on Friday. But I have an issue with t...
by Localhorst666
Jan 27 2020 5:40am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4978
Views: 349184

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

OK, I just read this issue #65 on GitHub. When I checked speed sensor yesterday, it seems to be working without light. I was able to start motor assistance three or four times, but I did not do a real test drive. So, I think you are right! Should I measure the battery current just of my lights? Woul...
by Localhorst666
Jan 27 2020 5:03am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4978
Views: 349184

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

Are you using lights? do you have lights installed? because there are issues with lights currently. Other than this, I donĀ“t have a clue and that is very strange behavior... Yes, I'm using lights! They are installed at Y-splitter of speed sensor. I guess, that will be the cause then. Is it an issue...
by Localhorst666
Jan 27 2020 3:58am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4978
Views: 349184

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

When I run into speed limit (25 km/h configured, respectively real 27 km/h) the motor turns off (works as designed up to this point), but when I slow down, the motor sometimes don't start again supporting. That happens in maybe in 30% of the cases, when I slow down from >27km/h. I have the feeling,...
by Localhorst666
Jan 24 2020 1:01pm
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4978
Views: 349184

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

My speed limit is set to 50 km/h and I have no such issues. Can you setup to 50 km/h and see if the issue persist? Also check the hall sensors signals, if they are failing intermittently, then motor will not rotate as it should... Your torque sensor curve seems equal to mine. OK. Thanks for the adv...
by Localhorst666
Jan 24 2020 8:18am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 4978
Views: 349184

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

Hi, I tested 850C_v0.6.2 since last weekend and switched yesterday to 850C_v0.6.4, in each case with related motor firmware certainly. I have a very strange issue. Even after the torque sensor calibration. Sporadically there is no motor support even on high assistance levels, sometimes directly afte...
by Localhorst666
Jan 18 2020 2:49pm
Forum: E-Bike Technical
Topic: Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware
Replies: 188
Views: 23127

Re: Bafang 850C color LCD -- Flexible OpenSource firmware

Hello to the developers, compliments for the great development of the software! One question, where can I activate and set the street mode on the Bafang 850C? I have the latest beta installed and cannot find the menu item. Thank you! Hello Casainho, can you tell me, how I can activate the "streetmo...