Search found 37 matches

by Mike-P
Feb 03 2020 12:14pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

RicMcK wrote:
Feb 02 2020 4:39pm
Mike-P wrote:
Feb 02 2020 1:57pm
Reading the Wiki whilst mine is disassembled I thought I ought to check the PAS sensor but the controller unit seems to stuck in place solid. Is there a trick to releasing it?
There are 2 small screws behind the plastic cover on the drive side.
Thanks
by Mike-P
Feb 02 2020 1:57pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

Reading the Wiki whilst mine is disassembled I thought I ought to check the PAS sensor but the controller unit seems to stuck in place solid. Is there a trick to releasing it?
by Mike-P
Jan 21 2020 12:56pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

Received my new torques sensor and the cabled part is of a different design Original Existing ts.jpg As supplied (albeit without the springs - have raised the matter) supplied torque sensor.jpg Note only two springs are shown in the suppliers photo and the wire connection is through a deep plastic m...
by Mike-P
Jan 13 2020 2:57pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

You will need to remove the sprag clutch if you want to replace the torque sensor. Thanks for the advice. I am also reading that the rear bracket/clamp will bite into the frame and chafe the paint. One solution is to wrap some rubber (bits of old inner tube) around the frame at the appropriate loca...
by Mike-P
Jan 12 2020 10:42am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

Found a youtube video [youtube]https://www.youtube.com/watch?v=-V3G0GSx4zg[/youtube] taking a completely different approach knocking the lot out from the rear which worked albeit probably potentially not too good for the health of the torque sensor. The only thing that seems looks faulty/seems odd i...
by Mike-P
Jan 12 2020 8:49am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

devboy-greg wrote:
Jan 12 2020 7:32am
In the repair manual (available here) they use a gear puller.

From my own personal experience I have always been able to gently ease it out by hand, Jbalat shows it in his video to replace the sprag clutch:
Thanks - easing does not seem to be working :(
by Mike-P
Jan 12 2020 7:13am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

Stripping mine down to try to establish what the fault might me and I cannot get anything to budge having taken the circlips off
Any suggestions would be appreciated. The o ring meanwhile has fallen off - presume it needs a new one, what size should I order?
IMG_20200112_115800212.jpg
IMG_20200112_115800212.jpg (220.23 KiB) Viewed 1582 times
by Mike-P
Jan 11 2020 9:27am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

Got it into maintenance mode but instead of any torque sensor readout it showed beneath the large r e the total mileage covered and the motor did work briefly. Restarted and now in maintenance mode four zeros (still with miles thereafter) and which never changed. Wondering if I have both a faulty to...
by Mike-P
Jan 09 2020 1:51pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

All the time we have had here with the motor kicking in and out has been to do with the speed sensor and the magnet Thanks for the info re the maintenance section :thumb: Its not the magnet - speed display is working fine on the display currently. The SW102 did arrive but not the necessary cable :(...
by Mike-P
Jan 09 2020 7:48am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

Check that your torque sensor is operating correctly by going into the maintenance part of the setup screen on the VLCD5, you have two fields which show the torque sensor readings. Tried that but some reason it jumps back to the main display before reaching it. Have just been out on the bike and th...
by Mike-P
Jan 08 2020 12:37pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

My TSDZ2 suddenly stopped assisting today - display okay working lights correctly but no assistance from the motor. Do I take it needs a new torque sensor or could it be something else?
by Mike-P
Jan 08 2020 12:35pm
Forum: E-Bike Non-hub Motor Drives
Topic: SW102 micro usb port
Replies: 2
Views: 407

Re: SW102 micro usb port

casainho wrote:
Jan 08 2020 6:29am
My SW102 does not have any USB port... can you please take a picture of your SW102 showing it?? Thank you.
Oh! I was reading the technical specification document on it which refers to a "Micro USB serial communication port, convenient for maintenance purposes. Still awaiting delivery of mine.
by Mike-P
Jan 06 2020 2:40pm
Forum: E-Bike Non-hub Motor Drives
Topic: SW102 micro usb port
Replies: 2
Views: 407

SW102 micro usb port

Anyone know if the SW102 display gives power out on the micro usb port - have a 6v directional indicator remote on the handlebars that uses a pair of CR2025s and wondering if I could wire it to the port instead.
by Mike-P
Dec 06 2019 3:45pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

My VLCD5 display played up today giving a speed of 0.0mph and an indication of :lowbatt: ; towards end of this mornings commute it did come to life. Back home this evening after powering it off and on a few times did started show accurate reading. It has been very cold recently and last night was th...
by Mike-P
Jul 19 2019 11:16am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

Aquakitty wrote:
Jul 18 2019 4:27pm
Mike-P wrote:
Jul 18 2019 3:49pm
Noticed my M33 wrench as supplied with the motor is becoming a bit worn; is there a better alternative?
How bout this one? https://www.greenbikekit.com/bafang-8fu ... -tool.html
Surely that has too many teeth = the TSDZ2 wrench only has 8 teeth
by Mike-P
Jul 18 2019 3:49pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

Noticed my M33 wrench as supplied with the motor is becoming a bit worn; is there a better alternative?
by Mike-P
Apr 30 2019 11:41am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

Tried the next smaller wheel setting and it seems have fixed the overspeed displayed mph, 26 (inches) being the setting which is 660mm, i.e. a 700 wheel (622mm diameter) with an extra 38mm attributable to the tyres.
by Mike-P
Apr 29 2019 11:48am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

Not sure what the display was playing at yesterday as today the motor apparently did not shut off until 17.1mph so set it the first smaller wheel to a 700 and 15.7mph is the displayed speed at which the motor shuts off. Will try the next but odds on that being less than 15.5mph (25km/h)
by Mike-P
Apr 28 2019 12:58pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New

https://r.tapatalk.com/shareLink?url=https%3A%2F%2Fendless-sphere%2Ecom%2Fforums%2Fviewtopic%2Ephp%3Ft%3D98281&share_tid=98281&share_fid=55725&share_type=t I've looked at that thread a number of times and no step by step guide seems to spring out of it as I can see. Would be useful if there was a s...
by Mike-P
Apr 23 2019 12:44pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

The setting I ve put in the configuration wizard is "700". Should I change it to something else? You could try a different setting, 700 wheels are 622mm diameter but the tyres will add to the diameter; for that reason most bike computers require the wheel circumference entering which for 700 wheels...
by Mike-P
Apr 22 2019 7:11am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

Got my double chainring fitted, the stripped crank came off when a faced with a brand new crank tool, now sure what it gripped onto as but must have been just enough thread to grip. Front derailleur fitted and working - slight chain rub on some chainring (38 and 48) 7 speed cartridge settings at the...
by Mike-P
Apr 14 2019 9:54am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

Find a tool like this: images.jpeg Neither the one I got (too thick) or one like that (Not enough reach around the crank) worked. Thinking of riding a local circuit then goes downhill and back up without the bolt in armed with an allen key the thickness of the one that its too thick and checking as...
by Mike-P
Mar 25 2019 2:03pm
Forum: E-Bike Non-hub Motor Drives
Topic: TSDZ2 with VLCD5 shutting off
Replies: 3
Views: 450

Re: TSDZ2 with VLCD5 shutting off

Check the connections in the cable twix motor and battery; if soldered it could be a dry joint, if by connectors are they firmly fitted together and the wires well secure.
by Mike-P
Mar 24 2019 3:20pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

Find a tool like this: images.jpeg Thanks Picked up a gear puller from local car/bike shop but its too thick to fit between the crank and chainring guard so will try trimming it although I suspect that may weaken it too much. Have noticed this one https://www.amazon.com/Custom-Accessories-78886-Pul...
by Mike-P
Mar 24 2019 12:37pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 6927
Views: 717492

Re: New "TSDZ2 Torque Sensor Central Motor"

Grand idea today was to fit the new chainring combo so crank puller tightened in place and then the releasing bolt turned and the puller came back out of the crank, the crank completely dethreaded :evil: Anyone any ideas of how to get the crank off? Have the stock chainring with solid chainring guar...