Search found 25 matches

by twist
Jun 06 2018 11:41am
Forum: E-Bike Technical
Topic: I just fried my Cycle Analyst .. can I still safe it?
Replies: 1
Views: 289

I just fried my Cycle Analyst .. can I still safe it?

Hi Everybody, this is not my day :evil: I have the following setup: 2 Cycle Analyst one runing a C9 2707FD Front Drive Moter with Phaserunner the other runing a BBSHD Mid Drive Moter with Phaserunner I changed one Cycle Analyst to run 5v PAS for the BBSHD PAS Sensor the other I left stock (10V). Big...
by twist
Jun 06 2018 8:35am
Forum: E-Bike Technical
Topic: Cycle Analyst with Proximity Sensor Brake - POT [problem]
Replies: 9
Views: 753

Re: Cycle Analyst with Proximity Sensor Brake - POT [problem]

I played around a bit and with R2=182 Ohm and R4=23k I get POT 0=0,68V and DOWN=0,28V / UP=0V and everything is working.

Don't like that R2 is so low ... should there be a problem?

Image

Cheers,
Christian
by twist
Jun 05 2018 2:33pm
Forum: E-Bike Technical
Topic: Cycle Analyst with Proximity Sensor Brake - POT [problem]
Replies: 9
Views: 753

Re: Cycle Analyst with Proximity Sensor Brake - POT [problem]

Thanks, I will try that! I just build out of the "Digital Aux Example" ( https://endless-sphere.com/forums/viewtopic.php?f=4&t=37964&start=3150#p1196642 ) the Digital 2 Button with POT Circuit but have also now a small problem :lol: POT_V2_001s.jpg The two buttons are only working right when the POT...
by twist
Jun 05 2018 2:08am
Forum: E-Bike Technical
Topic: Cycle Analyst with Proximity Sensor Brake - POT [problem]
Replies: 9
Views: 753

Re: Cycle Analyst with Proximity Sensor Brake - POT [problem]

1 BBSHD Mid Drive Moter 1 C9 2707FD Front Drive Moter 2 Cycle Analyst 2 Phaserunner So the original BBSHD controller has been removed? Yes, the controller is removed. It broke during a 5000km bike tour and right now I'm preparing for a 10000km bike tour and that is why I have 2 of each. The pot is ...
by twist
Jun 04 2018 3:25pm
Forum: E-Bike Technical
Topic: Cycle Analyst with Proximity Sensor Brake - POT [problem]
Replies: 9
Views: 753

Re: Cycle Analyst with Proximity Sensor Brake - POT [problem]

Thanks, will try to make a wiring diagram. Here are a bit more infos of the setup: 1 BBSHD Mid Drive Moter 1 C9 2707FD Front Drive Moter 2 Cycle Analyst 2 Phaserunner The pot is just for setting the PAS - Levels. I had the same setup running with just a switch for regen-brake and then everything was...
by twist
Jun 04 2018 10:18am
Forum: E-Bike Technical
Topic: Cycle Analyst with Proximity Sensor Brake - POT [problem]
Replies: 9
Views: 753

Re: Cycle Analyst with Proximity Sensor Brake - POT [problem]

I put a Diode between GND and the brake and now it's a little bit better but still not usable.

Now the brake engages sometimes for a milisecond and the Throttle Out goes up to like 1.3v.

Maybe somebody has an idea. I'm guessing I have to put somewhere a resistor :roll:

Cheers,
Christian
by twist
Jun 04 2018 8:39am
Forum: E-Bike Technical
Topic: Cycle Analyst with Proximity Sensor Brake - POT [problem]
Replies: 9
Views: 753

Cycle Analyst with Proximity Sensor Brake - POT [problem]

POT01s.jpg POT02s.jpg POT03s.jpg I first had a End-Stop switch with metal flap but that broke on my first test ride so I desided a Proximity Sensor (CJMCU-0101) for breaking would be the best idea and it is a perfect solution because I just have to get close to the brake to brake with regen :D Now ...
by twist
Jun 02 2018 4:17am
Forum: E-Bike Reviews & Testing
Topic: Grin Phase Runner / CA3 and BBSHD
Replies: 165
Views: 43168

Re: Grin Phase Runner / CA3 and BBSHD

Here 3 Photos of the cabling: BBSHD - Cabeling 01s.jpg I used the original cable from the BBSHD that was connected to the controller and cut it off from the controller. Then I just attached a new JST plug to it and connected it to the Phaserunner. For the PAS sensor I just used an old CAT-Cable (you...
by twist
Jun 01 2018 4:35pm
Forum: E-Bike Reviews & Testing
Topic: Grin Phase Runner / CA3 and BBSHD
Replies: 165
Views: 43168

Re: Grin Phase Runner / CA3 and BBSHD

Hi Everybody, working right now also on the same setup. The cabling for this setup is easy if you are follow this threat :) Download and print out the electricwheels.de Wiring Diagram (that saved my day!): https://endless-sphere.com/forums/viewtopic.php?f=4&t=91775&start=25#p1360020 Then print out t...
by twist
Jan 05 2018 10:13am
Forum: E-Bike Technical
Topic: What is the best motor for regen braking?
Replies: 7
Views: 1682

Re: What is the best motor for regen braking?

Thanks dogman dan for your infos!!! :D Love that bike ... what kind of stand are you using? :) On my last tour I broke 2 stands ( https://www.instagram.com/opendocumentary/ ) :roll: Now I'm still a bit confused but a little bit smarter :) I have orderes 2 Cycle Analyst and 2 Phaserunner Controller a...
by twist
Jan 05 2018 3:09am
Forum: E-Bike Technical
Topic: What is the best motor for regen braking?
Replies: 7
Views: 1682

Re: What is the best motor for regen braking?

Thank you for your great input! I now ordered the 9c+ Front 2707 and the Phaserunner and hope that non of my motors break on this tour :) I was in contact with Justin from Grin and he tryed to explain to me the difference between the 9c+ 2707 and 9c+ 2706 when running with the Phaserunner and he sai...
by twist
Jan 03 2018 4:48pm
Forum: E-Bike Technical
Topic: What is the best motor for regen braking?
Replies: 7
Views: 1682

Re: What is the best motor for regen braking?

Thank you for the help! After looking at the MOTOR SIMULATOR from Grin and reading your advice I think the 9c+ Front 2707 ( http://www.ebikes.ca/m2707fd.html ) would be a good choise for me and keeping the BBSHD but with the Phaserunner as a controller. I will be also thinking about adding maybe one...
by twist
Jan 03 2018 8:22am
Forum: E-Bike Technical
Topic: What is the best motor for regen braking?
Replies: 7
Views: 1682

What is the best motor for regen braking?

Hi everybody and happy new year, this year I planing a 10000km ebike tour from Spain to Sweden (and back) and will be modifing my bike a lot. 2016 I already did a 5000km ebike tour from UK to Spain with a Surly Big Dummy ( https://www.instagram.com/opendocumentary/ ) with a BBSHD and after around 30...
by twist
Sep 12 2016 12:29am
Forum: E-Bike Non-hub Motor Drives
Topic: NEED HELP from the Italian Community
Replies: 5
Views: 702

Re: NEED HELP from the Italian Community

Thanks,! Tested the battery and I have as a Charger the Grin Satiator. So the last charges where ok. I had a guy testing a few cables and the display is not getting the 5v or whatever it needs to work and also not the 48v to show on the voltmeter in my display. And the display was also giving me dif...
by twist
Sep 11 2016 2:59am
Forum: E-Bike Non-hub Motor Drives
Topic: NEED HELP from the Italian Community
Replies: 5
Views: 702

Re: NEED HELP from the Italian Community

So I had the motor apart and it must be the controller (90%) Does anybody know a seller in Italy? Right now I am 125km to Verona and will try to bike the shortest way to Marseille (France). Any help would be welcome ... Have to bike right now 80% of the day (while I am awake :)) Not much time to sea...
by twist
Sep 09 2016 4:32am
Forum: E-Bike Non-hub Motor Drives
Topic: NEED HELP from the Italian Community
Replies: 5
Views: 702

NEED HELP from the Italian Community

I'm right now biking from England over Budapest to Spain and now I'm in Slovenia and bike towards Italy and my Bafang BBSHD is not working anymore! Battery is ok but even the Display is not turning on anymore! I think (hope) that just one of the connection cables is damaged but it hard to find out w...
by twist
Mar 02 2016 8:31am
Forum: E-Bike Non-hub Motor Drives
Topic: Bafang 1000w v Bosch and Yamaha
Replies: 13
Views: 9970

Re: Bafang 1000w v Bosch and Yamaha

I'm German and the Bosch System (Designed in Germany) is a great system but I would still go with the Bafang! In the end I also bought the Bafang BBSHD because you have just way more power and options then with the Bosch System. If you go with Bosch you are stuck with Bosch (kind of). Pro for Bafang...
by twist
Mar 02 2016 8:20am
Forum: E-Bike Non-hub Motor Drives
Topic: Yuba Mundo w Bafang BBSHD
Replies: 5
Views: 1652

Re: Yuba Mundo w Bafang BBSHD

Planing of doing the same ... I already have the Bafang BBSHD and that motor is great and it should be perfect with the Yuba Mundo. I have it right now in a converted Xtracycle (but that one has to much flex with heavy loads) and it should work without problems with the Yuba Mundo but would also lik...
by twist
Feb 22 2016 9:40am
Forum: E-Bike General Discussion
Topic: New bike or conversion? 28 Inch wheel.
Replies: 11
Views: 1184

Re: New bike or conversion? 28 Inch wheel.

I would use a Mid Drive Kit: http://lunacycle.com/mid-drive-kits/ I have the BBSHD and am really happy with it. It is easy to convert (good for beginners) ... the controller is inside the motor mount (so less cables/cleaner look) and the wheel size doesn't matter because you don't change anything on...
by twist
Feb 22 2016 7:31am
Forum: E-Bike General Discussion
Topic: Cargo EBike build for 7000km Tour - what do you think?
Replies: 8
Views: 1069

Re: Cargo EBike build for 7000km Tour - what do you think?

My plan is to couch-surf all the time and always have a place where I can charge the batteries over night. I'm planing to conduct interviews almost every day and all my gear also needs to be charged so enough energy is essential on this tour and I will just not have the time to wait for charging or ...
by twist
Feb 18 2016 2:20pm
Forum: E-Bike General Discussion
Topic: Cargo EBike build for 7000km Tour - what do you think?
Replies: 8
Views: 1069

Re: Cargo EBike build for 7000km Tour - what do you think?

Thanks ... will be going to Slovakia as well With a small hub-motor just for redundancy is a great idea! I also didn't think of parallel charging with multiple chargers ... that's a great tip! My plan was to charge with 4Ah most of the time over night. For my camera & audio stuff I need a 100% water...
by twist
Feb 18 2016 10:35am
Forum: E-Bike General Discussion
Topic: Cargo EBike build for 7000km Tour - what do you think?
Replies: 8
Views: 1069

Cargo EBike build for 7000km Tour - what do you think?

I'm planing right now an building a Cargo Ebike for a 7000km tour in Europe and would like to get some input from people who have maybe more experience. Start date will be 1. of August ... so I have time till then to finish everything up. Right now I already have a Bafang BBSHD on an converted Bike ...
by twist
Feb 11 2016 3:23pm
Forum: E-Bike General Discussion
Topic: Bafang EB-BUS cable too long?
Replies: 12
Views: 1819

Re: Bafang EB-BUS cable too long?

Thank you! I was looking for that!

Here the links that I found:
http://www.higoconnector.com/higo
http://www.higoconnector.com/products/z ... 999K#title

But I didn't find a Shop where I can buy them ... does anybody know a store?
by twist
Feb 11 2016 8:50am
Forum: E-Bike Non-hub Motor Drives
Topic: Bafang BBS-HD cabling ??
Replies: 13
Views: 5987

Re: Bafang BBS-HD cabling ??

I tested the two light connecter. If I turn on my light of the C965 display I have on: BLUE/BLACK 5.8V RED/BLACK 6.2V If I turn the light off there is 0V ... so it has really somethink todo with the light. Wish it would have been 12V! Maybe we can use it to charge our phone :) Does anybody know how ...
by twist
Feb 11 2016 8:19am
Forum: E-Bike General Discussion
Topic: Bafang EB-BUS cable too long?
Replies: 12
Views: 1819

Re: Bafang EB-BUS cable too long?

Would be good to know how the plugs are called so that we can make are own cables!

Does anybody know?

Each bike is different and this way everbody could make his own cables.

Cheers