Search found 667 matches

by eyebyesickle
Jul 30 2020 5:12pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 7602
Views: 791099

Re: New "TSDZ2 Torque Sensor Central Motor"

famichiki wrote:
Jul 30 2020 4:42pm
eyebyesickle wrote:
Jul 30 2020 8:45am
Ooooh buddy. Narrow Wide 50T w/ 10mm offset getting closer...

Do you know how long I have wanted these?

Ahhhhhhhhh
Looks great, I noticed you have your own 42T now too. Will the 50T have an identical finish?
"Any color you want them in as long as it's black"

- Henry Ford

Haha, yeah
by eyebyesickle
Jul 30 2020 8:45am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 7602
Views: 791099

Re: New "TSDZ2 Torque Sensor Central Motor"

Ooooh buddy. Narrow Wide 50T w/ 10mm offset getting closer...

Do you know how long I have wanted these?

Ahhhhhhhhh
by eyebyesickle
Jul 30 2020 7:08am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 7602
Views: 791099

Re: New "TSDZ2 Torque Sensor Central Motor"

I just flashed my 48v TSDZ2 motor with the stock firmware following the instructions on the eco-bike.com website and now the motor is completely dead! There's nothing! The screen still comes on but no power on throttle or PAS... Anyone else experienced this? Anything I can do to troubleshoot / fix?...
by eyebyesickle
Jul 28 2020 9:20pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 7602
Views: 791099

Re: New "TSDZ2 Torque Sensor Central Motor"

The temperature sensor is installed and has been tested to be accurate. It is like what it seems - the system is reading incorrect value for the temperature sensor - you need to check again the sensor and the wiring to the motor controller. But the current temperature in the lower picture is 127, w...
by eyebyesickle
Jul 28 2020 6:59pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 7602
Views: 791099

Re: New "TSDZ2 Torque Sensor Central Motor"

The temperature sensor is installed and has been tested to be accurate. It is like what it seems - the system is reading incorrect value for the temperature sensor - you need to check again the sensor and the wiring to the motor controller. But the current temperature in the lower picture is 127, w...
by eyebyesickle
Jul 25 2020 1:38pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 7602
Views: 791099

Re: New "TSDZ2 Torque Sensor Central Motor"

The TSDZ2 seal is actually shaped like a double seal as in it has two sharp faces to seal up against the plastic cover, by its shape the seal should rotate within the cover rather than the bearing face rotating in the seal. I'm not sure which way it was designed to be as its pretty normal for the s...
by eyebyesickle
Jul 21 2020 6:47pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 7602
Views: 791099

Re: New "TSDZ2 Torque Sensor Central Motor"

Thank you, I'll try to verify if everything is fine and then buy a relay. Is this one suitable? This is what's used in the below video. https://www.eco-ebike.com/products/solid-state-relay-3v-32v-switch-input-w-5v-220v-load-output RuHUcbF1ClE fanichiki, it's good to see someone watched the video! I...
by eyebyesickle
Jul 20 2020 9:52pm
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 6054
Views: 410416

Re: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

I also noted the Eco-Bikes have lots of different cables (1T1, 1T2, etc https://www.eco-ebike.com/search?q=1T1). Would I need one of these cables to programme the 860C or the TSDZ2? If not, what are these cables for? 1T1 is if you only have a display. 1T2 adds throttle. 1T3 and 1T4 add one or two b...
by eyebyesickle
May 23 2020 12:47pm
Forum: Vendor Relations Corner
Topic: US distributor for TSDZ2 mid drives??
Replies: 10
Views: 2247

Re: recycles-ebike.com

I had to abandon my shopping cart on recycles-ebike.com for the following reasons: No SSL whatsoever. This means everything is sent in the clear (name, address, email, username, password, etc) No business address. "Store Information" at the bottom of the page is clickable but it triggers no action....
by eyebyesickle
May 23 2020 12:03pm
Forum: E-Bike Non-hub Motor Drives
Topic: TSDZ2 120mm Axle Broke for the 2nd time on my Fatbike
Replies: 49
Views: 3986

Re: TSDZ2 120mm Axle Broke for the 2nd time on my Fatbike

Anyway, not to be abrasive, I just want to make sure everyone has accurate info, and that a company/product is not misrepresented. FYI, I am the one that arranged the production of 100mm and 120mm bottom bracket extensions, AFTER futurebike has been doing it for a while. First futurebike did it, and...
by eyebyesickle
May 23 2020 11:16am
Forum: E-Bike Non-hub Motor Drives
Topic: TSDZ2 120mm Axle Broke for the 2nd time on my Fatbike
Replies: 49
Views: 3986

Re: TSDZ2 120mm Axle Broke for the 2nd time on my Fatbike

By the way.... any idea where to buy BB100mm shaft.... I have not found locally (for reasonable price) and eBird store has not been answering to my questions. See this post . There are only 2 sources, the Italian shop and the Chinese one. The Chinese source sells it through 3 different vendors, onl...
by eyebyesickle
May 23 2020 11:01am
Forum: E-Bike Non-hub Motor Drives
Topic: TSDZ2 120mm Axle Broke for the 2nd time on my Fatbike
Replies: 49
Views: 3986

Re: TSDZ2 120mm Axle Broke for the 2nd time on my Fatbike

I've been looking into a way to mount a TSDZ2 on a fat bike. I only learned about future-bike.it in this thread, but there are others as you mention HerskerHans. You may find this useful to sort out the supply chains: vendors.png It looks like all the vendors are actually the same company apart fro...
by eyebyesickle
Mar 28 2020 10:29am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 7602
Views: 791099

Re: New "TSDZ2 Torque Sensor Central Motor"

First, the clock looses time. This seem to be a mfg flaw and perhaps the display should be replaced? Not critical but annoying. I have a Luna 750c on another bike which does the same thing. Is the 860 display any better in this regard? Second, the drive works well and silently about one out of 3 st...
by eyebyesickle
Mar 06 2020 10:22am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1355
Views: 131082

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

While the typical brakes for VLCD5/TSDZ2 only use 2 pins, these are in a 3 pin connector, and the receiver on the back of the VLCD-5 does in fact have a 5v pin (on all 3 ports, for the throttle, and both ebrakes, even if it isn't typically used)... so it could easily be utilizing this...
by eyebyesickle
Mar 05 2020 8:35pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 7602
Views: 791099

Re: New "TSDZ2 Torque Sensor Central Motor"

Can someone point to documentation that the TSDZ2 only works with 52v batteries with Open Source Firmware? I'm pretty sure that's the case, but wonder if someone figured out how to set the 54.6v max to 58.8v without going to OSF? I ask because I bought the Euronau 48v TSDZ2 kit with the 850C displa...
by eyebyesickle
Mar 05 2020 1:32pm
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 6054
Views: 410416

Temperature Sensor Install

FYI Been working on a good temp sensor install... The cap near the top has 5-6mm wall thickness. I drill a small pilot hole (7/64 - 2.8mm) about 4mm deep, and screw the sensor in with a 6mm long 3mm self tapping screw (needs a pilot hole although it is self tapping)... The sensor base itself is a go...
by eyebyesickle
Mar 04 2020 12:10am
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1355
Views: 131082

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

Well the TSDZ2 operates fine with no signal... Hmmm....
by eyebyesickle
Mar 03 2020 11:22pm
Forum: Motor Technology
Topic: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18
Replies: 1355
Views: 131082

Re: Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

I am quite interested in this. The only way I can see the gear sensor working when hooked to a speed sensor port, is if it makes a temporary spike in the speed sensor pickup, tricking the system to thinking that it went over the speed limit and causing a temporary cutout... Is that what you accompli...
by eyebyesickle
Mar 03 2020 3:44am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 7602
Views: 791099

Re: New "TSDZ2 Torque Sensor Central Motor"

Hi guys Sorry if this has been asked before, I havent read through the whole thread yet :shock: I wonder if anyone has installed the tsdz2 in a more "modern" style pressfit BB? Like a shimano PF 92? If I order a fatbike 100mm version and use adapters and 8mm spacers, would that work? Or is the outs...
by eyebyesickle
Mar 01 2020 6:41pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 7602
Views: 791099

Re: New "TSDZ2 Torque Sensor Central Motor"

Are all the motors the same 36v, 48v or 52v? I ordered a 52v overdrive erosion from Eco-Cycles and now see on the bottom of the motor it is marked 36v. There are 2 different inside motors in the 36v, and the 48/52v versions. The 36v motor used at higher voltage with certain programming is what real...
by eyebyesickle
Feb 28 2020 12:34am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 6054
Views: 410416

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

... I yes, I am also buying the Blue gear for 20 euros on Aliexpress straight to my door, the only thing is that it takes some time and hand dirty to replace it inside the motor :-) Do you have a good reliable source on Aliexpress please? There are so many, and it's good to know the good from the b...
by eyebyesickle
Feb 26 2020 3:15am
Forum: Motor Technology
Topic: TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)
Replies: 6054
Views: 410416

Re: TSDZ2 mid drive and 850C and SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

If I’m looking to buy a tsdz2 motor is there a recommended hardware setup that would allow the most freedom when running the open source software? I’d like to have a 750W, 48V mid-drive that will accommodate a rear coaster brake. I’ve seen someone state that one of the 36v versions Converted to 48v...
by eyebyesickle
Feb 25 2020 4:21am
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 7602
Views: 791099

Re: New "TSDZ2 Torque Sensor Central Motor"

As my chainline is soooo out of straight I thought of the Alfine SG-S7001-11 (11 gears, 409% from lowest to highest gear, ebike approved). Any comments on this before I buy (the whole set is almost 450€ with gear lever and stuff ...) Screenshot from 2020-02-24 20-30-05.png Looks nice. I haven't bee...
by eyebyesickle
Feb 21 2020 11:24pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 7602
Views: 791099

Re: New "TSDZ2 Torque Sensor Central Motor"

I don't think there are 'new' motors coming. There was a very recent change to the motor housing, and other small changes as well... Also TS says they are not making changes, but did say something about a custom change for a customer order. Anyway, that's the info I have. I could be ill advised, but...
by eyebyesickle
Feb 16 2020 9:53pm
Forum: E-Bike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 7602
Views: 791099

Re: New "TSDZ2 Torque Sensor Central Motor"

Hi, I'm hoping someone can help me with some issues I've been having with my tsdz2 build. I bought the 750w 48v motor, planning to get a 48v battery in NZ. This proved impossible for me so I had to settle for a 36v battery. I flashed the 36v files from the eco-bike tutorial which was easy enough. O...